The kernel support in OpenEmbedded for the Compulab cm-x270 has been updated to version 2.6.24. The 2.6.24 kernel opens up several possibilities including better real… Read More »Compulab cm-x270 kernel update to 2.6.24
As detailed in the article I wrote back in September of 2007 (http://bec-systems.com/web/content/view/75/9/), getting embedded wifi modules functioning is not a simple task. However, due… Read More »Marvell Embedded SDIO Wifi Success
I recently updated the Mono recipes in OpenEmbedded to include the Mono 1.2.6 version. Several critical bugs that were present in 1.2.5 have been fixed,… Read More »Mono 1.2.6 added to OpenEmbedded
Update: Michael Dominic K. has kindly provided feedback on this article and has some additional points about Mono and embedded systems. Mono has included support… Read More »C# on embedded ARM Linux systems is now practical
From http://www.embedded.com/design/opensource/204300381 : Host platform Although everything I will describe can be also done on a Windows host, I recommend using Linux. It’s more convenient,… Read More »Embedded Linux development on Windows???
Updated 2.6.23 kernel patches for the Compulab cm-x270 are now available in OpenEmbedded: http://www.openembedded.org/filebrowser/org.openembedded.dev/packages/linux/linux-2.6.23/cm-x270 The cm-x270 support in OpenEmbedded has undergone a lot of clean-up… Read More »Linux 2.6.23 for the Compulab cm-x270
There are quite a few people using (or would like to use) OpenEmbedded on the Compulab cm-x270. The cm-x270 is a high performance, low cost… Read More »Howto load Openembedded on the Compulab cm-x270 computer module
If you are having trouble mounting a JFFS2 file system on a Compulab cm-x270 module, you may have a device that has a NAND flash… Read More »Compulab cm-x270 NAND flash eraseblock sizes
Original article published 2007-10-04 As of today, the Mono build in OpenEmbedded is working pretty well. Mono support for ARM and other embedded architectures should… Read More »Mono support in OpenEmbedded and Openmoko packages
Update 2007-10-14: use IMAGE_INSTALL in image recipe Update 2007-10-22: a few corrections, added full path for include and comments Update 2010-06-07: use recipes instead of… Read More »The correct way to add packages to an OpenEmbedded Image